a house with passive housing, with three months of rain and clouds tea light food warmers no longer

Hello everyone, as the title my problem is condensation and therefore mold all over the walls of my apartment perimeter exposed to the outside. tea light food warmers Being on the top floor and having exposed on three sides of the house you can imagine ... The amount of condensation that in the bedroom (facing north), I often find the wet floor and the walls that are inevitably colonized by molds , especially in proximity of the corners at the top, the doors-windows and behind furniture, (detached from the wall also more than 10cm). During the cold winter days we leave the windows open in the bedroom for hours and hours (in camera), in the hope that the change of air contrasts the formation of mold, but all in vain. In the same room and in the kitchen do not talk about ... Because I'm tired of pouring liters of bleach from November to April and the only internal insulation of walls is not an ideal solution, I was wondering if the application under the plaster of a system radiant tea light food warmers heating + coat inside, might be a solution to the problem of condensation and mold. We have two small children and the situation is becoming untenable, any more than good advice and I accept, thank you all in advance.
First point: tea light food warmers ventilate properly! the moisture tea light food warmers you create the family and when you're at home, breathing, cooking, showers ... every two hours you should open a whole 15 minutes, tea light food warmers day, night, rain sun ... if you do not open the moisture remains inside. if you leave closed 4 hours straight can crear problems such as too much moisture if you leave a row now open in the winter it creates others as too cool walls mold grows best with humidity above 70% and temperature of the wall (surface) around 13-15gradi
a house with passive housing, with three months of rain and clouds tea light food warmers no longer passive _____________________________________________________________________________________________ tea light food warmers teaching IDM bands E and F: outer coat to ELIMINATE all thermal bridges (as experienced with the block several times, does not eliminate the pt bins Coupling installation tea light food warmers (UNI EN ISO10211) of the counter, the sun screen, the connection with the ground floor / wall elevation + ... + triple glazed walls from 0.10 W / mqk
The nick FRINGUI Arduino Plant Management and Rilvezione Temperatures On-Line Panels 56 tubes U-pipe opening 8.84 m 2 Orient. / Tilt .: SOUTH-SOUTH / EAST / 60 Condensing Boiler 24 kW stove heater Wood: 13.8 kW (3kW environment 10,8kW Water) buffer 750 L 3 heating coils: 130 m 2 + radiant heater wipes City: Cannobio - Prov. VB - Degree Day 2583 - Climatic Zone E
Thanks for the Vs. answers. In winter, the walls are always cold, regardless of the fact that I leave the windows open or not. In truth I let air out for a long time to go away the bad odor that persists especially in the bedroom, which I think is linked to the mold or do not know what ... The apartment in 2006, we have already delivered false ceiling because they said it was too high, the close of the ground floor has the same problem. The windows are double glazed with wooden air chamber (during the winter always wet), we do not have plants inside and stretch it into the house. In late winter we remember to turn the mattress for the change from the summer to winter and in practice, the side that was facing the floor was wet and the feet of the bedside tables had become even green.
The nick FRINGUI Arduino Plant Management and Rilvezione Temperatures On-Line Panels 56 tubes U-pipe opening 8.84 m 2 Orient. / Tilt .: SOUTH-SOUTH / EAST / 60 Condensing Boiler 24 kW stove heater Wood: 13.8 kW (3kW environment 10,8kW Water) tea light food warmers buffer 750 L 3 heating coils: 130 m 2 + radiant heater wipes City: Cannobio - Prov. VB - Degree Day 2583 - Climatic Zone E
The nick FRINGUI Arduino Plant Management and Rilvezione Temperatures On-Line Panels 56 tubes U-pipe opening 8.84 m 2 Orient. / Tilt .: SOUTH-SOUTH / EAST / 60 Condensing Boiler 24 kW stove heater Wood: 13.8 kW (3kW environment 10,8kW Water) buffer 750 L 3 heating coils: 130 m 2 + radiant heater wipes City: Cannobio - Prov. VB - Degree Day 2583 - Climatic Zone E
The radiators are not always running, go at set times, say about 10-11 hours a day. To get to 23C off, unfortunately I can not remember at what temperature they share.
Hello as you can read in my presentation I am right in this ... your mold problem arose from the simple fact given by a faulty insulation or non-existing